Larsen use the latest developments in Piling equipment as detailed below. All of our equipment is branded and all are considered light weight and compact for their pile type, which can lead to cost and time saving.

Please note vibration monitoring is available for use with all our piling systems.

Learn more about vibration monitoring.
 
Grouted DCI Rig  
Grouted DCI Rig
  • Piles up to 100T
  • Zero spoil
  • 4.5m reach to pile from rig
  • Pile within 500mm of existing structure
  • Ultra low vibration
  • Rig under 3m wide
  • Minimal site preparation
  • Ultra stable piling
  • Suitable alternative to CFA piling

Learn more about Grouted Ductile Cast Iron Piling

DCI Rig  
 DCI Rig
  • Piles up to 100T
  • Zero spoil
  • 4.5m reach to pile from rig
  • Pile within 500mm of existing structure
  • Ultra low vibration
  • Rig under 3m wide
  • Minimal site preparation
  • Ultra stable piling
  • Suitable alternative to precast CFA top driven tubes

Learn more about Ductile Cast Iron Piling

 

Pile Ace  
Pile Ace
  • Piles up to 30T
  • 5.5t Mini Crane based piling rig
  • Under 2m wide
  • Suitable for all external works
  • Ideal for larger sites/extensions/garages/single houses
  • Low vibration

Learn more about Mini Piling

D500  
D500 Rig
  • Piles up to 30T
  • Remote powered mini piling rig
  • 1.5t rig
  • 800mm wide
  • Low vibration
  • Ideal for restricted access sites/internal works
  • Quiet power pack
  • Minimal head room required - 2.6m
  • Operates up to 20m from powerpack

Learn more about Mini Piling

VERMEER  
Vermeer mini piling rig
  • Piles up to 35T
  • Vermeer HL1000 weighing 4.5T
  • Under 1.6m wide
  • Suitable for all external works
  • Low vibration
  • Ideal for larger sites/extensions/garages/single houses

Learn more about Mini Piling

T750  
T750
  • Piles up to 15T
  • Our smallest mini piling rig
  • 1.0t rig
  • Operates up to 20m from power source
  • Requires only 720mm access
  • Headroom required 2.4m
  • Used for both indoor and remedial work

Learn more about Mini Piling

95mm Air Driven Grundomat  
Grundomat
  • No rig, compressor air driven hand held piling hammer
  • Piles up to 5T
  • Operates up to 40m from power source
  • Ideally suited to restricted access and/or light loads Eg. Underpinning or conservatory work

Learn more about Grundomat

Screw Pile  
Screw Piles
  • Piles up to 20T tension or compression
  • Remote powered hand held equipment

Learn more about Screw Piling